Overall Review Battery Under Voltage Relay
BATTERY UNDER VOLTAGE RELAY
In various systems that use a variety of batteries as a power supply, any possible decrease in the battery voltage level can have an adverse effect on the performance of such systems, for example, in emergency power systems (Generator diesel and UPS) any reduction in voltage level The system feeding batteries can create disorders such as timely non-start, from the control of the control system and its panel, and create unpredictable damage in the circuits of such systems. The battery voltage relay with the installation of nutrition can be monitored on its voltage, and if the voltage is reduced, the command of the relay output is activated and prevent possible problems by connecting to the alert system.
For easy application and installation, this relay is embedded in a proper cover that can be installed on the DIN EN 50 022 rich. In order to connect the inputs and outputs of this relay, appropriate thermal infections are considered in two directions that can refer to the technical guideline for these connections. To set the voltage level, a potential potant is embedded on the relay. Two highlight display (LED) is also considered to display the battery status and relay feeding.
After connecting the input voltage, the terms are intended, and the voltage level regulation is launched by the potential for proper nutrition voltage and green display on the relay. If the battery voltage of the surface determined by the lower user, the red display and its output containment is also enabled. If the voltage level attached to the relay, the red display of the red display and the output containment will also be disabled.