P2S200TCRAG1ACC

0 نفر
گارانتی یک ساله پارس پرداز
خدمات پس از فروش 10 ساله پارس پرداز
موجودی انبار : 0
حداکثر توان تولید در سفارش : 20
زمان تولید : 2ماه
قیمت :
سفارش دهید
محصولات مشابه
IS200TBTCH1BBB
IS200TBTCH1BBB
IS200TTURH1BED
IS200TTURH1BED
IS215VCMIH2CC
IS215VCMIH2CC
IS200TSVOH1BDC
IS200TSVOH1BDC
IS200TPROH1BCB
IS200TPROH1BCB
IS215VPROH1BGG
IS215VPROH1BGG
IS200TBAIH1BBB
IS200TBAIH1BBB
IS200VSVO
IS200VSVO
DS200DTBDG1ABB
DS200DTBDG1ABB
IS200TRLYH1BGG
IS200TRLYH1BGG
DS200DACAG1ACD
DS200DACAG1ACD
IS200TRTDH1CCC
IS200TRTDH1CCC
IS200TRPGH1BDE
IS200TRPGH1BDE
IS200TTPWH1AAB
IS200TTPWH1AAB
IS200VAICH1CBA
IS200VAICH1CBA
DS200TCPDG2BEC
DS200TCPDG2BEC
DS200SLCCG3AGH
DS200SLCCG3AGH
IS200VTCC
IS200VTCC

نقد و بررسی تخصصی P2S200TCRAG1ACC

The Relay Output Board (TCRA), located in the core and the core, contain up to 30 relays, K1 through K30. There are two of these boards in the each of the digital I/O cores. The TCRA board in location four of the core contains only four relays, which are connected to the TCQE via the JO connector. These relays are used to operate the gas manifold blow off valves in some applications. The other three boards contain the full 30 relays. The first 18 of these relays in the TCRA board in location four of the core can be “wetted” or powered to become solenoids. The first 16 of these relays on the TCRA board in location five of both the and core can be wetted also. This is done using hardware jumpers on the DTBC and DTBD terminal boards. Two additional contact outputs, (#47 and #48), can be wetted on the TCRA board in location five of either or using the power connectors J19 and J20. Connectors J19 and J20 bring 120/240 V ac power from the core to the DTBD board in one of the cores. These signals are typically used for ignition transformers. The signals to open or close the relays are written to the TCRA boards via the TCDA boards in the and cores. The signals for the TCRA board in location four of the core are read from the TCQE board in the core

.