IS200VTCC

0 نفر
موجودی انبار :
حداکثر توان تولید در سفارش :
زمان تولید :
قیمت :
سفارش دهید
محصولات مشابه
IS215VPROH1BGG
IS215VPROH1BGG
DS200TCDAH1BHD
DS200TCDAH1BHD
IS200TBTCH1BBB
IS200TBTCH1BBB
IS200VSVO
IS200VSVO
IS200TTURH1BED
IS200TTURH1BED
DS200SLCCG3AGH
DS200SLCCG3AGH
IS200TPROH1BCB
IS200TPROH1BCB
IS200TBAIH1BBB
IS200TBAIH1BBB
DS200DTBDG1ABB
DS200DTBDG1ABB
IS200TSVOH1BDC
IS200TSVOH1BDC
IS200VAICH1CBA
IS200VAICH1CBA
IS200TRPGH1BDE
IS200TRPGH1BDE
IS200TRTDH1CCC
IS200TRTDH1CCC
IS215VCMIH2CC
IS215VCMIH2CC
IS200TRLYH1BGG
IS200TRLYH1BGG
IS200TTPWH1AAB
IS200TTPWH1AAB
DS200TCPDG2BEC
DS200TCPDG2BEC
IS200VVIB
IS200VVIB

نقد و بررسی تخصصی IS200VTCC

The thermocouple processor board VTCC accepts 24 type E, J, K, S(see note), or T thermocouple inputs. These input are wired to two babrrier type blocks on the terminal board TBTC. Cables with molded plugs connect the terminal board to the VME rack where the VTCC thermocouple board is located. The TBTC can provide both simplex (TBTCH1C) or triple module redundant (TMR) (TBTCH1B) control.

مشخصات فنی IS200VTCC

    مشخصات کارت
  • Number of channels 24channels per terminal board and I/O board
  • Thermocouple types E,J,K,S, T thermocouples,and mV inputs
  • Span 8mV to +45mV-
  • A/D converter Sampling type 16-bit A/D converter with better than 14-bit resolution
  • CJ compensation Reference juncion temperature measured at two locations on each TC terminal board (optional for remove CJs).TMR board has six cold junction referenes.
  • Cold junction temperature Cold junction accuracy2 F
  • Conformity error Maximum software error 0.25 F
  • Measurement accuracy 53microvolts (excluding cold junction reading)
  • Common mode rejection Ac common mode rejection 110 dB @ 50/60 Hz, for balanced impedance input
  • Common mode voltage ±5v
  • Normal mode rejection Rejection of 250 mV rms is 80 dB @ 50/60 Hz
  • Scan time All input are sampled at 120 times per second for 60 Hz operation;for 50 Hz operation it is 100 times per second
  • Fault detection High/low (software) system limit checkHigh/low {hardware) limit check
.